This natural grade, produced by monomer casting process, demonstrates similar characteristics to Nylon 66. Cast materials contain significantly lower stress levels combined with high strength, good creep and wear resistance resulting in great dimensional stability when machining. It offers the possibility of manufacturing large-sized stock shapes as well as custom castings which require only minimal machining. With material being more dimensionally stable comparing to the one of widely used polyolefin, it can be used for a much closer tolerance parts.

Nylon is used for a wide range of industrial components both for Original Equipment Manufacture and maintenance. Some examples: wear pads, support and guide wheels, conveyor rollers, tension rollers, pulleys and pulley linings, cams, hammer heads, scrapers, gear wheels, sprockets, feed screws, star wheels, chopping boards, insulators, bearing slides, roller sleeves, impact blocks, full & segmented gears, outrigger pads, pump seats, gate rollers & support wheels, etc.

• Technical Data Sheet 
• Product Information Sheet 

Material Properties

Nylons are good for use in a wide range of industrial applications such as slide bearings, wear pads, support and guide wheels, conveyor and tension rollers, pulleys and pulley linings, cams, gear wheels, sprockets, seal-rings, feed screws, star wheels, chopping boards, insulators etc. Nylons can be machined into end-used products by a wide variety of mechanical machining methods. It combines high strength, stiffness and hardness with good creep and wear resistance, heat ageing properties, very good impact properties and machinability. As well as high tensile strength and high modulus of elasticity.

Applications